PowerMAX UV-A LED Panel Flood Lamp - PM-8B

• UV-A Intensity Range: 6,500µW/cm² at 15" (38cm)
• UV-A Coverage Area: 10 x 16 in at minimum 1,000 µW/cm²
• Visible Light Measurement: < 1 foot-candles (< 11 lux)
• White Light Intensity: >325 foot-candle (>3500 Lux)
• Light Source: (8) UV-A (365nm) LEDs
• Lamp Style: Panel flood lamp
• Length: 10 in. (25.4 cm)
• Width: 8 in. (20.32 cm)
• Height: 5 in. (12.7 cm)
• Weight: 8.9 lbs (4 kg)
• Power Requirements: 100V - 264V, 50-60 Hz
• Intensity Control: From 15% - 100%

• ASTM E3022-18
• EN ISO 3059
• AIRBUS AITM6-1001 Compliant
• EN 62471 Declaration of Compliance

Key Features

• 8 UV-A LEDs and 2 White LEDs in a single unit
• ASTM E3022-18 compliant for nondestructive testing applications
• Rocker switch to easily switch between UV and white light modes
• Electronic intensity control capable of adjusting light output from 15% to 100%
• Integral UV-A pass filters to reduce visible wavelengths
• Aluminum housing built for rugged environments
• Mountable design for overhead inspection or in-line applications
• Long-lasting LEDs for extended operational life
• Complete kit includes PowerMAX 365 UV-A LED Panel Flood Lamp, power cord, chain and hooks

Benefits

• High-intensity illumination: 6,500 μW/cm² nominal steady-state UV-A intensity at 15 inches
• Very low visible light interference: Less than 0.5 foot-candle (2.2 lux)
• Significant coverage area: 10 x 16 inches at minimum 1,000 μW/cm²
• Dual functionality: UV-A inspection and white light illumination (>325 foot-candle/>3500 lux) in one device
• Adjustable intensity: Can be reduced to precise levels as low as 1,000 μW/cm²
• Versatile application: Ideal for various NDT inspection environments
• Compact and lightweight: 8.9 lb (4 kg) with dimensions of 10 x 8 x 5 inches (25.4 x 20.32 x 12.7 cm)
• Ready to use: Complete kit includes all necessary mounting hardware

Kit comes complete with:

• PowerMax 365 UV-A LED panel flood lamp
• Power Cord
• Chain
• Hooks

What is the PowerMAX™ used for? It's a stationary LED UV-A panel flood lamp used to light NDT inspection booths, fluorescent penetrant and magnetic particle inspection, wash station inspection, and fluorescent particle screening. It's built for jobs that need even UV-A coverage over a large area, and it mounts overhead or in-line.

Who uses PowerMAX lamps? NDT technicians and QC teams in industrial, aerospace, and clean room environments who need fixed overhead lighting for inspection booths. They can switch between UV-A and white light with a rocker switch, so there's no need to swap lamps between steps.

How is the series organized? Two models: the PM-8B (8 UV-A LEDs and 2 white LEDs, up to 6,500 µW/cm²) and the larger PM-16B (16 UV-A LEDs and 4 white LEDs, up to 8,500 µW/cm²). Both include intensity control and ship as a complete kit with power cord, chain, and hooks.

What is the PM-8B used for? It's an overhead UV-A/white-light panel flood lamp (up to 6,500 µW/cm², 10 x 16 in coverage) used for NDT inspection in smaller booths, work stations, and wash stations. It is ASTM E3022 compliant.

Can the intensity be adjusted? Yes. Electronic intensity control adjusts output from 15% to 100%, down to about 1,000 µW/cm², so technicians can match the UV-A level to the job.

How does it compare to the PM-16B? The PM-8B is smaller and lighter (8.9 lb vs. 16.5 lb) with a tighter coverage area (10 x 16 in vs. 18 x 17 in) and lower maximum intensity. The PM-16B is the better choice for larger parts and wider booths.