EDGE™ 13 LED Overhead Lamp EDG-13SBLC

• Nominal Steady-State UV-A Intensity at 4700 uW/cm2
• UV-A Coverage Area: 14.5 x 13 in (37 x 33 cm)
• Visible Light Measurement: < 1 foot-candles ( <11 lux)
• Light Source: (13) UV-A (365nm) LEDs
• Lamp Style: Panel flood lamp
• Length (L x W X H): 11 x 14 x 9 in. (28 x 36 x 23cm)
• Weight: 14 lbs. (6.4 kg)
• Power requirement: AC power (main AC power cord supplied with the unit) Available in 100-120V (50/60Hz), 230V, and 220/240V (50Hz) versions

• ASTM E3022-18
• Rolls Royce RRES 90061
• AIRBUS AITM6-1001 Compliant
• EN ISO 3059
• IP65 Rated

Key Features

• 13 UV-A LEDs providing large area coverage with even illumination
• ASTM E3022-18 and Rolls-Royce RRES 90061 compliant for nondestructive testing
• Meets EN ISO:3059 specifications
• Thermal cut-off circuitry prevents compliance issues when temperature exceeds specifications
• Integral UV-A pass filters to reduce visible wavelengths
• Fanless design with state-of-the-art heat sinks for cool operation
• Long-lasting UV-A lenses that virtually eliminate clouding/solarization
• Flexible arm for mounting at specific angles
• Easily mountable for overhead inspection or in-line applications
• Gangable design allowing multiple units to be connected for wider coverage
• Dust tight and water resistant construction

Benefits

• High-intensity illumination: 4,700 μW/cm² nominal steady-state UV-A intensity at 15 inches
• Minimal visible light interference: Less than 1 foot-candle (11 lux)
• Extensive coverage area: 14.5 x 13 inches (37 x 33 cm) at minimum 1,200 μW/cm²
• Versatile power options: Available in 100-120V, 230V, and 240V versions
• Quality assurance: Certificate of Conformance and Validation Report included
• Reliability: Cool running design with thermal protection
• Adaptability: Can be positioned at specific angles and mounted in various configurations
• Expandable system: Multiple units can be connected for larger inspection areas

What is the EDGE™ Series used for? It's Spectro-UV's line of overhead LED UV-A panel flood lamps used for NDT inspection where a lamp needs to be mounted overhead rather than handheld, covering large parts inspection (EDGE 13) or wash station applications (EDGE 4). All EDGE lamps are IP65-rated, dust-tight, and protected against water jets from any angle.

Who uses EDGE lamps? NDT professionals in industrial, aerospace, and clean room environments who need fixed overhead UV-A coverage for large-part inspection booths or wash stations, rather than a handheld lamp for spot inspection.

How is the series organized? EDGE 13 (13 UV-A LEDs, three models) is built for large parts inspection with wide area coverage; EDGE 4 (4 UV-A LEDs, one model) is purpose-built for wash station environments, trading intensity for wider, more uniform coverage.

What is the EDG-13SBLC used for? It's an overhead UV-A panel flood lamp (4,700 µW/cm², 14.5 x 13 in coverage) used for large parts inspection requiring full regulatory compliance, ASTM E3022, ISO 3059, RRES 90061, AIRBUS AITM6, and Pratt & Whitney.

Who uses it? Aerospace and regulated NDT facilities needing certified overhead lighting for inspection booths, with the broadest compliance coverage in the EDGE 13 lineup.

How does it compare to the EDG-13HC and EDG-13T? It's the only fully compliant model of the three. The HC and T deliver higher intensity (8,500 µW/cm² vs. 4,700 µW/cm²) but with less or no compliance certification.